FMTD Series Specs

	All materials in contact with the fluid media are 316 stainless steel and PTFE.

	LR76077 Explosion Proof, Class I, Division 1, Groups C & D Certified By Canadian Standards Association. INTRINSICALLY SAFE Certification by CSA (Added Cost Option "IS").

	Ranges: FMTD4: <.015-4.00 GPH [1-250 ccpm] FMTD20: <.075 -20.00 GPH [5 - 1250 ccpm]			Displacement: FMTD4: Approximately 50 pulses per cc FMTD20: Approximately 10 pulses per cc

	Accuracy: +/- 0.5%			Temp. Range: -40 To +180° F [-40 To +80°]

	Repeatability: +/- 0.1%			Power: 8 - 30 VDC, 50 milliamps maximum

	Output Signal: 0 - 5 Volt Square Wave			Power/Signal Cable: 3 Feet [1 Meter] Long

	Maximum Operating Pressure: 3,000 psig [21 MPa] Standard 21,000psi [147 MPa] Added Cost Option "P"			Process Connections: 1/4"NPT

	Max. P: 5 psi [34kPa] FMTD4 15 psi [102kPa] FMTD20			Conduit Connection: 1/2" NPT

	Dimensions: 2.50" D. X 4.63 " L. [6.4 cm D. X 11.8 cm L.]			Weight: 2.9 Pounds [1.32 Kg.]

	Viscosity: 100 SSU [25 cp] Maximum Recommended. Higher Viscosities Reduce Low Flow Rate Capabilities.

ProFlow Dynamic, LLC 330 S. Maple Street Units F&G, Corona, CA 92880
Phone: 951.279.5500 | Fax: 951.279.5525 | Toll-Free: 888.875.FLOW | info@proflowdynamics.com | sales@proflowdynamics.com